Configuring VLAN Trunking
In order to connect multiple VLANs to networks, you need to set up VLAN trunking. The following example illustrates the setup for cognitix Threat Defender assuming that:
port
enp3s0
is connected to VLAN10 untagged,port
enp4s0
is connected to VLAN20 untagged,port
enp5s0
is the trunk port for VLAN10 and VLAN20.
Under Network > Manage Processing Interfaces, configure the following setup:
Bridge |
Port ID |
VLAN Range |
---|---|---|
VLAN10 |
|
|
VLAN10 |
|
10 |
VLAN20 |
|
|
VLAN20 |
|
20 |
Disable the default interface configuration, i.e. set the slider switch to . Otherwise, your configuration will not take effect.
Click the APPLY CHANGES button in the header to activate your configuration changes.